검색 결과:

76mm water well dth bit

10 발견 된 제품

미션 누마 CIR90-100 물 우물 Dth Bit 76mm 90mm 100mm

dth bit DHD Mission Numa CIR90-100 water well dth bit 3 Inch High Air Pressure 150mm 200mm Blast Hole Drilling Bit DTH Hammer Button Bits For Core Drilling Rig The DTH Bits for Hammers are manufactured according to the best quality standards using high quality Steel grade in order to guarantee maximum performance. Our Bits are used for Constructio, Water well drilling, Geothermal Drilling, Micropiles, Quarry and Mining field. Concave Face DTH Bit For medium soft to medium

굴착 장비 부분 광산수 우물 D번째 드릴 로드 지름 76 밀리미터 89 밀리미터 102 밀리미터를 만들기

Mining Water Well Dth Drill Rods Diameter 76mm 89mm 102mm 114mm 127mm 140mm Features: 1. Made from seamless steel tube with cold drawn craft. 2. Material:XJY850/30CrMnSiA meets the global standard. 3. Heat treated procdure ensures the drill rod has superior strength, wear resistance and toughness 4. Rods and casing are manufactured under stringent industry standards, and are field tested under a variety of conditions. Standard DTH drill pipe: Diameter: 76mm, 89mm, 102mm,

76mm 89mm 102mm DTH 굴착 스탠드 API 굴착 도구 가공 처리 유형

76mm 89mm 102mm API Drilling Drill Pipe DTH Drill Rod : Drill rod, also known as hydraulic drill rod, heavy duty drill rod in top hammer rock drilling. The threaded drill rod for sale is connected with shank adapter and drill bit through the threads on both sides of the rod body, and transmits the impact energy and torque of the hydraulic rock drill to the drill bit for rock drilling. if you're looking for high-quality drill rod factories for your rock drilling needs, look no

하드 록을 위한 높은 76mm 압력 Dth 해머 버튼 드릴 비트

low pressure high 76mm pressure dth hammer button drill bit for hard rock 3 Inch High Air Pressure 150mm 200mm Blast Hole Drilling Bit DTH Hammer Button Bits For Core Drilling Rig The DTH Bits for Hammers are manufactured according to the best quality standards using high quality Steel grade in order to guarantee maximum performance. Our Bits are used for Constructio, Water well drilling, Geothermal Drilling, Micropiles, Quarry and Mining field. Concave Face DTH Bit For

150mm Dth는 우물 드릴링 리그를 위한 아래로 구멍 단추 드릴용 날을 망치로 칩니다

Dth hammer down the hole button drilling bits for water well drilling rig Introduction of Mining+Machinery+Parts:drill bit 1. Powerful Adaptability, adapt for various kinds of rock with rigidity form F6-F20. 2. Adaptable for various kinds of hammers including low pressure, medium pressure and high pressure. 3. Material and process:high quality alloy steel bar and tungsten carbides, through heat treatment DTH bits have powerful drilling capacity, great reliabiltiy and low

핵심 굴착 장치를 위해 비트 기압 DTH 망치 버튼 비트를 꿰뚫는 3 인치 높은 것 150 밀리미터 200 밀리미터 송풍 구멍

3 Inch High Air Pressure 150mm 200mm Blast Hole Drilling Bit DTH Hammer Button Bits For Core Drilling Rig The DTH Bits for Hammers are manufactured according to the best quality standards using high quality Steel grade in order to guarantee maximum performance. Our Bits are used for Constructio, Water well drilling, Geothermal Drilling, Micropiles, Quarry and Mining field. Concave Face DTH Bit For medium soft to medium hard rock conditions in consolidated ground conditions in

3-1/2 "89mm 물 우물 드릴링 리그 예비 부품 바위 파이프 드릴 스탠드

3-1/2" 89mm Water Well Drilling Rig Spare Parts Rock Drill Pipe Drill Rod 89mm Water Well DTH Drill Pipes Description: Product: Water well DTH drill pipes Size: 3-1/2" (89mm) OD: 89mm Wall thickness: 8mm Joint: 2-3/8" API reg or 2-3/8" API IF Length choose: 1.5m, 3m, 4.5m, 5.8m, 6.1m, 7m, 8.8m, 9.7m, 12m or based on yours. Thread Connection choose: API REG, API IF, API NC, FH, XH. Steel grade: R780, J55, E75, X95, G105, S135. Spanner flats: with Water Well drill rods widely

537 IADC 코드 트라이콘 롤러 록 비트 6 12 14 5 12 트라이콘 롤러 롤러 록 비트

Non-sealed Roller Air Bearing Mining Roller Cone Bits Tricone Roller Rock Bit 6 12 14 5 12 Tricone Drill Bit This series bits are non-sealed Roller Bearing bits that are cooled and cleaned by air with fast drilling speed and good strength which are used for the development of open-pit coal mines, iron mines, and non-ferrous metal mines. The thrust bearing is made of materials with high wear resistance, high hardness, and high temperature resistance to improve its load-bearing

트리 코너 하드 록 롤러 트리콘 붓 비트 8 1/2 "IADC 코드 537 617 437 그라닌

8 1/2" IADC Code 537 617 437 Tri-Cone Hard Rock Roller Tricone Drill Bit For Granite Non-sealed Roller Air Bearing Mining Roller Cone Bits This series bits are non-sealed Roller Bearing bits that are cooled and cleaned by air with fast drilling speed and good strength which are used for the development of open-pit coal mines, iron mines, and non-ferrous metal mines. The thrust bearing is made of materials with high wear resistance, high hardness, and high temperature

처음으로 1 2 마지막